Detailed Explanation of the Usage method of the wood cutting machine

The detailed usage method of the wood cutting machine is as follows:

First, preparations before operation

Equipment inspection

Carefully inspect the performance of the wood cutter to ensure that every component is in good condition.

Check the switch of the power knife switch, the tightness of the saw blade, the saw blade guard or safety baffle and other parts to ensure the stability of the operation console.

If it is night work, make sure there is sufficient lighting brightness.

Make sure the power supply is consistent with the regular rated voltage on the power tool and do not connect it to a power supply of other voltages by mistake.

Material fixation

Place the wood on the cutting table and fix it with a strong magnet or a special fixture to prevent shaking during cutting.

Mark the cutting lines clearly on the wood to ensure the cutting accuracy.

No-load test run:

Turn on the switch of the cutting machine. Do not cut the object directly. Instead, run it no-load for a few turns first to confirm that it is safe and correct before starting it.

Second, the process during operation

Start the cutting machine:

Start the cutting machine, adjust the height of the cutting head to keep it at an appropriate distance from the wood surface (usually about 6 millimeters), and ensure the correct focal length.

Start cutting:

Hold the handle of the cutting machine firmly, apply force evenly and cut vertically down. Avoid cutting with a strong saw.

When cutting, the operator should stay away from the front of the saw blade, wear protective glasses and a mask or face shield to prevent injury from dust and splashes.

It is strictly prohibited to use saw blades that are already damaged. When cutting, be careful to prevent sparks from flying and keep away from flammable and explosive items.

When cutting, be careful not to cut small workpieces that are not clamped by the saw, and do not cut profiles with severe edges either.

When sawing multiple workpieces together, auxiliary clamping and positioning work should be done well to ensure that the workpieces are firmly clamped.

Monitor the cutting process:

During the cutting process, there should be personnel observing the processing situation nearby to ensure the normal operation of the machine and processing safety.

In case of emergency, press the "Emergency Stop" button immediately and cut off the power supply.

Third, post-operation maintenance

Turn off the equipment:

After the cutting is completed, turn off the power immediately.

Clean the equipment

Clear the debris and waste in the cutting area to prevent them from being ignited by the laser and causing a fire.

Regularly clean and maintain the wood cutting machine, such as checking the wear of the saw blades, promptly replacing cracked, notched or deformed saw blades, and lubricating and maintaining key components like guide rails and slide rails, to extend its service life and keep it in good working condition.