Detailed explanation of the use of wood cutting machine

　　The use of wood cutting machine is detailed as follows:

　　Preparation work:

　　First, ensure that the power switch of the wood cutting machine is turned off, and clean the residual wood chips or dust on the machine.

　　Check that the blade of the cutting machine is installed correctly and adjust the depth and Angle of the blade as needed.

　　If inclined cutting is required, adjust the Angle scale on the cutting platform and ensure that the cutting platform and clamping equipment are in a stable condition.

　　Before turning on the power switch, confirm the security of the device and prepare to perform operations.

　　Prepare wood:

　　The wood to be cut is placed on a cutting platform and secured to the cutting area using a clamping device. Make sure the wood is tightly secured to prevent movement during cutting.

　　Run the cutting machine:

　　Turn on the power switch and start the cutting machine. Adjust the cutting speed and feed speed according to the hardness and cutting requirements of the wood.

　　Before starting to cut, ensure that the cutting area is free of other obstacles or people and that adequate lighting is maintained.

　　To cut:

　　Hold the wood close to the cutting blade, but do not let your hand touch the blade. Hold the wood by hand and apply even pressure to the larger surface.

　　Move the wood slowly along the desired cutting line, maintaining a steady motion and avoiding moving the wood too hard or too fast.

　　During the cutting process, observe the cutting area at all times to ensure that the wood does not get stuck or move. If a problem is found, stop the cutting machine immediately and make adjustments.

　　Finish cutting:

　　When the cutting reaches the required depth or cutting line, stop the cutting machine. Wait until the blade stops rotating completely before proceeding to the next step.

　　Use the appropriate tools to remove the wood from the cutting platform and check that the cutting quality meets the requirements.

　　Note:

　　Before using the cutting machine, be sure to carefully check the performance of the equipment to ensure that every component is in good condition.

　　Check the switch of the power gate knife, the tightness of the saw blade, the saw blade guard or safety baffle in detail to ensure the stability of the operating table.

　　Avoid cutting down, especially when cutting small and medium pieces of wood. Cutting down is a dangerous operation, which can easily cause accidental injury and machine damage.

　　During the cutting process, do not stand behind the saw blade or the cutting line to avoid being injured by wood chips or debris flying.

　　When taking a break or leaving the workplace, cut off the power supply immediately and ensure that the equipment is completely stopped.

　　Following the above steps and precautions can ensure the safe and efficient use of the wood cutting machine. At the same time, regular maintenance and maintenance of equipment is also an important measure to maintain its good performance.

　　Rilyn-Our company is committed to creating a one-stop shopping solution for global woodworking machinery users, we have planer saw machine, wood router machine,wood laser cutting machine and other series of equipment.