Operating rules for wood cutting machines

　　The operating procedures of the wood cutting machine are as follows:

　　Preparation work:

　　Ensure work area is clean and clear of obstacles.

　　Check that the blade and base of the cutting machine are stable and installed correctly.

　　Check whether the blade is sharp and adjust or replace it if necessary.

　　Ensure that the power supply of the cutting machine is normal and grounded.

　　Wear appropriate personal protective equipment, such as safety helmet, protective glasses, protective gloves, etc.

　　Boot operation:

　　Turn on the power switch and start the cutting machine.

　　Observe the speed of the blade to ensure that it is running smoothly.

　　Prepare wood:

　　The wood to be cut is placed on the cutting machine's workbench and secured to the cutting area using a clamping device.

　　Make sure the wood is secure and in the right position.

　　Start cutting:

　　Keep hands dry and free of oil or water stains.

　　Use a suitable push rod or pressure plate to ensure that hands do not touch the rotating saw blade.

　　Slowly push the wood to the blade, maintaining even pressure and avoiding overpush.

　　Keep your hands away from the blade and keep your fingers away from the edge before cutting.

　　Cutting process:

　　Stay focused and do not get distracted or away from work.

　　Observe cutting conditions to ensure cutting quality and safety.

　　End of cutting:

　　After cutting, release the cutting button to ensure that the blade stops running.

　　Watch the cut carefully to make sure the wood is cut correctly and there are no residual problems.

　　Check whether the table of the cutting machine is smooth and needs to be adjusted or repaired.

　　Equipment maintenance:

　　Clean the cutter and blade regularly to remove wood chips and dust.

　　Check that cables and wires are intact to ensure the safety of the power supply.

　　Adjust or replace the blade as needed to maintain its sharpness.

　　Safety precautions:

　　Operators must remain awake and must not drink, smoke or be fatigued.

　　Do not play in the vicinity of the cutting machine, keep the right appearance, skilled movement.

　　Comply with all safety regulations and operating procedures to ensure the safety of yourself and others.

　　Following the above operating procedures and safety precautions can ensure the safe and efficient operation of the wood cutting machine.

　　Rilyn-Our company is committed to creating a one-stop shopping solution for global woodworking machinery users, we have planer saw machine, wood router machine,wood laser cutting machine and other series of equipment.