Curve cutting method of wood cutting machine

The methods of curved line cutting by wood cutting machines mainly include the following:

Selection and application of straight saw blades and curved saw blades:

Straight saw blades and curved saw blades differ in design and application. When performing curved line cutting, a narrower curved saw blade should be selected to accommodate a smaller turning radius.

When performing curve cutting with a smaller radius, narrow saw blades can offer better flexibility and precision.

Preparations before cutting:

Confirm the size and shape of the working area and the wood, and select the appropriate cutting tools and saw blades.

If it is necessary to cut a knife in the middle of the sheet, a hole should be drilled with a drill bit first to facilitate the insertion of the saw blade and the start of the cutting.

Use metal guide frames to assist in cutting:

For straight cutting or curved cutting that requires maintaining a certain width, metal guide frames can be used for assistance.

One end of the guide frame is tightly against the reference edge of the sheet, and the other end is inserted into the socket on the saw base. By adjusting the position and scale of the guide frame, the straightness or specific width of the cut can be ensured.

Circular and arc cutting:

Circular cutting can be achieved by inverting the guide rail onto the sheet, fixing it at the center point with nails or wood screws, and then adjusting the radius size for cutting.

When the starting cutting point is in the center of the sheet, a hole needs to be drilled with a drill bit as the starting point.

Cutting operation skills:

Pick up the cutting machine and place it on the surface of the wood to be cut. Arrange the saw blade according to the required shape and size.

During the cutting process, special care must be taken to control the movement direction of the saw blade to avoid causing danger and damage during the cutting process.

For complex curved shapes, it may be necessary to adjust the cutting direction and Angle multiple times.

Safety Operating Procedures:

Before operation, check whether the saw blade has been tightened in the correct position.

Use protective equipment such as gloves and goggles to protect your hands and eyes from sawtooth injuries.

Regularly clean the cutting machine and saw blades to prevent dust and corrosion from affecting the cutting effect.