How to use laser wood cutting machine?

　　The steps to use a laser wood cutter are as follows:

　　Preparation work:

　　Ensure that the power supply and cooling system of the laser cutting machine are working properly.

　　Check that the cutting head and optical fiber of the cutting machine are clean to ensure that no dust or impurities affect the cutting effect.

　　Prepare the wood that needs to be cut, and place it on the cutting table, and fix it with fixtures or magnetic suction, etc., to ensure that the position of the wood is accurate.

　　Set parameters:

　　Set the appropriate cutting parameters according to the type, thickness and cutting requirements of the wood. These parameters include laser power, cutting speed, gas flow, etc. It is important to note that the faster the cutting speed is not always better, and the lower the power is the better. Because the faster the speed, the lower the power, the harder it might be to cut in. You should try to get the lowest power at the fastest cutting speed, which is the ideal cutting parameter.

　　Adjust focus:

　　Adjust the focal length of the cutting head so that the laser beam can be accurately focused on the wood surface. This can usually be done by moving the cutting head or adjusting the lens.

　　Start cutting:

　　Press the start button and the laser cutter starts working. The laser beam is emitted from the cutting head, focused through the lens, and illuminated on the surface of the wood for cutting.

　　Monitor the cutting process:

　　In the cutting process, it is necessary to observe the position relationship between the cutting head and the wood, as well as the quality of the cutting line to monitor the cutting process. If necessary, the cutting parameters or focal length can be adjusted to optimize the cutting effect.

　　Finish cutting:

　　When the cutting is complete, stop the laser cutting machine.

　　Cleaning and maintenance:

　　After the cutting is complete, the work surface and equipment need to be cleaned to remove the wood chips and residue generated during the cutting process.

　　Regular maintenance and maintenance of the laser cutting machine, such as cleaning the surface and interior of the equipment, checking whether the optical path system is affected by foreign bodies, regularly calibrating working parameters, etc., to ensure the long-term and efficient operation of the equipment.

　　In addition, the use of laser wood cutting machine also need to pay attention to the following safety matters:

　　Familiar with the equipment: the operator should be familiar with the composition, structure, working principle and safe operation procedures of the laser wood cutting machine.

　　Correct operation: In accordance with the normal procedures and methods of operation, not careless.

　　Safety protection: Operate in a special operating room to reduce the impact on the surrounding environment; Wear protective hats and gloves, avoid facing the light to avoid burning eyes; Keep a safe distance.

　　Regular maintenance and maintenance: to ensure the long-term and efficient operation of the equipment, in line with the requirements of national safety production.

　　The above are the basic steps and precautions for using laser wood cutting machines, the specific operation may vary depending on the equipment model and cutting requirements. In actual operations, you are advised to refer to the device manuals and the instructions provided by the manufacturer.

　　Rilyn-Our company is committed to creating a one-stop shopping solution for global woodworking machinery users, we have planer saw machine, wood router machine,wood laser cutting machine and other series of equipment.