Wood engraving machine two common problems

　　Wood engraving machine in the use of the process, may encounter a variety of problems, but the following two are more common:

　　Spindle motor problem:

　　Spindle motor heating: this may be due to the pump is not working, or circulating water below the level resulting in poor heat dissipation. The pump and circulating water system need to be checked to ensure that they are working properly.

　　Spindle motor weakness or inability to turn: this may be due to circuit problems, motor line phase loss, or cable short circuit. The circuits, motor wires, and cable wires need to be checked to make sure they are not faulty.

　　Spindle motor abnormal sound: may be due to motor overload or internal failure. In this case, the motor should be repaired or replaced in time.

　　Engraving accuracy and effect problems:

　　Engraving misalignment and opposite engraving direction: This may be due to a circuit problem between the driver output and the stepper motor, and the faulty circuit needs to be checked and reconnected.

　　Engraving depth varies: This can be caused by a variety of reasons, such as control card failure, drive failure, spindle motor failure, frequency converter interference or incorrect data Settings. It is necessary to investigate these possible causes one by one, and make corresponding repairs and adjustments.

　　Scribbling: This can be caused by a variety of reasons such as control card failure, frequency converter interference, file path errors, static interference, software setup problems, or drive failure. It also needs to be checked and fixed one by one.

　　In order to maintain the normal operation and engraving accuracy of the wood engraving machine, it is recommended that the user carry out regular maintenance and maintenance, including cleaning, lubrication, inspection of screws and electrical systems. At the same time, in the process of use, it is also necessary to pay attention to operation specifications and safety matters to avoid failures and safety accidents caused by improper operation.

　　Rilyn-Our company is committed to creating a one-stop shopping solution for global woodworking machinery users, we have planer saw machine, wood router machine,wood laser cutting machine and other series of equipment.